13.2 Operator Authentication
13 - 7
SECURITY LEVEL AND OPERATOR SETTINGS (SECURITY SETTING)
13
(a) Add operation
Add operator information to the GOT.
Step 1. Touch the [Add] button.
Step 2. The Operator information edit screen is
displayed. Touch the [Next] switch to
display an item to be edited, and touch
the item.
(a) Operator Name
(b) Operator ID
(c) Level
(d) Password
(e) Expration
(f) External auth
(g) Ext. auth. ID
(a) If the operator name is touched, a keyboard is
displayed. Input an operator name with the
keyboard.
Character types to be input can be changed by
touching the [KEY] button.
When the input is completed, touch the [ENT] key.
(b) If the operator ID is touched, a keyboard is
displayed. Input an operator ID.
Character types to be input can be changed by
touching the [KEY] button.
When the input is completed, touch the [ENT] key.
(c) If the level is touched, a keyboard is displayed.
Input an operator level.
Character types to be input can be changed by
touching the [KEY] button.
When the input is completed, touch the [ENT] key.
When the level of the operator being login is
changed during editing the operator information, a
new level is not reflected until you log out of the
GOT once and log in the GOT again.
To Next Page
Loading...
Need help?
General
