13 - 6
13.2 Operator Authentication
(4) Operator management operation
Step 1.
Touch [Operator] → [Operator info.].
Step 2. The Admin password authentication
screen is displayed, and then input the
administrator password.
Character types to be input can be
changed by touching the [KEY] button.
When the input is completed, touch the
[Enter] key.
Step 3. When the administrator password is
correctly input, the Operator information
management screen in displayed.
For operation of operating switches,
refer to the following.
[Add]
➠ This subsection(4) (a)
[Edit]
➠ This subsection(4) (b)
[Delete]
➠ This subsection(4) (c)
[Import]
➠ This subsection(4) (d)
[Export]
➠ This subsection(4) (e)
Step 4. Touching the button displayed on
the upper right returns to the previous
screen.
To Next Page
Loading...
