Mitsubishi GOT2000 Series User Manual

2.10 Controller
2 - 47
2
GOT BASIC SETTING
POINT
POINT
POINT
(1) How to select a keyword protection level
For equipments that are allowed to operate the FX PLC on line, 3 levels of protection level
can be set.
When performing monitoring or changing settings with any on-line equipment is required, set
password with referring to the following.
(a) When setting keyword only
Select a protection level by the initial letter of keyword.
Read/Incorrect write protection: Set a keyword with initial letter of "B".
Incorrect write protect: Set a keyword with initial letter of "C".
(b) When setting keyword and 2nd keyword
Select a protection level by [Registration condition].
(2) Monitoring availability at each keyword protection level
Device monitoring availability at each keyword protection level is shown in the following.
(3) Difference between all online operations prohibition and all operations prohibition
When specifying All online operations prohibited, displaying devices and inputting data with a
programming tool or GOT are all prohibited.
When all operations are prohibited, displaying devices and inputting data with the GOT are
enabled while all operations using a programming tool are prohibited.
All operation
protect:
Set a keyword with initial letter of "A", "D" to "F", or "0" to "9".
Item
When setting keyword only When setting keyword and 2nd keyword Keyword
not
registered
or
protection
canceled
All
operation
protect
Read/
Incorrect
write
protection
Incorrect
write
protect
All on-line
operation
protect
Read/write
protect
Write
protect
Monitoring devices ○○○× ○○○
Changing
devices
T, C set value and
file register (D1000
and the following)
××××○○○
Other than the above ○○○× ○○○

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English