Nilfisk-Advance CS7000 - Head Light Bulb - Standard 12 V Halogen

Electrical System 140Service Manual – CS7000
Head Light bulb - Standard 12v Halogen
1. Disconnect headlight electrical connector
Caution! DO NOT install a replacement halogen bulb into the socket while the headlight is
plugged in. If the conguration menu is set for LED headlights, up to 42 volts could
be available to the headlights. Plugging the 12 volt halogen bulb into a 42 volt source
could cause the bulb to shatter in your hand.
2. Replace Bulb
3. Enter the Conguration Menu, “Light Option and select “Standard Light”.
4. Re-connect the headlight electrical connector.