Nilfisk-Advance CS7000 - Maintenance and Adjustments; To Clean the Solution Filter Screen

Solution System 329Service Manual – CS7000
Maintenance and Adjustments
Warning! Before performing any machine maintenance or adjustments, make sure the key
switch is off, the key is removed from the machine and the parking brake is engaged.
To Clean the Solution Filter Screen
1. Close the solution shutoff valve.
Note: Placeasuitablecontainerunderneaththeltertocatchanysolutionthatmayleakfromthe
hoses.
2. Unscrew the Filter Cover and remove the Filter Cover and Screen from
the Filter Base.
3. Clean any accumulated dirt or debris from the Screen.
4. Reinstall the Screen into the Filter Base.
5. Make sure the Rubber Washer is installed correctly in the Filter Cover,
then reinstall and hand-tighten the Filter Cover.
Filter
Cover
Filter
Base
Screen
Rubber
Washer