Hopper System 270Service Manual – CS7000
12. Rotate the Lower Cylinder Fitting upward back
to its original upward position and make sure
the Lower Cylinder Fitting nut is tight.
13. Install a Cap into the Lower Cylinder Fitting.
14. Disconnect the “DOWN” Hydraulic Hose from
the “DOWN” Pump Port.
15. Install a Cap on the “DOWN” Pump Port.
Cap
Lower
Cylinder
Fitting
“DOWN”
Hydraulic
Hose
“DOWN”
Pump Port
Cap
“DOWN”
Pump Port
To Next Page
Loading...
