Hopper System 273Service Manual – CS7000
28. Remove the cap from the “DOWN” Pump Port
and reconnect the “DOWN” Hydraulic Hose to
the “DOWN” Pump Port.
29. Disconnect the “UP” Hydraulic Hose from the
Lower Cylinder Fitting.
30. Install a Cap onto the Lower Cylinder Fitting.
31. Install a Plug into the “UP” Hydraulic Hose.
“DOWN”
Hydraulic
Hose
“DOWN”
Pump Port
Cap
Lower
Cylinder
Fitting
Plug
“UP”
Hydraulic
Hose
To Next Page
Loading...
