Nilfisk-Advance CS7000 - Page 280

Options and Accessories 280Service Manual – CS7000
Description Illustration
Rear Corner Roller Kit
Hopper Temperature Sensor Kit
The Hopper Temperature Sensor
Kit includes a Temperature Switch
and mounting hardware. If the
temperature in the hopper rises
to a certain point, the Temperature
Switch
will generate a caution and
signal the main machine controller
to turn off the dust control motor,
main broom system and side broom
system, and close the hopper dump
door.
Plugged Filter Switch Kit
The Plugged Filter Switch Kit
includes a Dust Control Filter Switch
that threads into the hopper and
connects to the existing wiring
harness. The Dust Control Filter
Switch
will generate a warning if
the hopper vacuum gets too high,
indicating a plugged dust control
lter.
Dust Control
Filter Switch
Temperature
Switch