EasyManua.ls Logo

Nilfisk-Advance CS7000 - Page 342

Nilfisk-Advance CS7000
440 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solution System 342Service Manual – CS7000
Component Specications
Low-pressure (Wash Hose)
Pump
Type - diaphragm, self-priming, internal check valve
Voltage - 36 VDC, permanent magnet
Internal pressure switch:
Set to switch pump on at 25 ± 5 psi
Set to shut pump off at 45 psi
Performance Specications (average)
Pressure (psi) GPM Amps
10 3.16 2.1
20 3.00 2.6
30 2.76 2.9
40 2.62 3.2
50 2.26 3.5
High Pressure Pump
Type - Axial piston
Max. Pump Speed - 1750 RPM
Max. Flow Rate - 2.11 gpm [8 l/min]
Max Outlet Pressure - 2,200 psi [150 bar]
Max Inlet Pressure - 116 psi [8 bar]
Oil Type - SAE 30, 10 oz. capacity
Shaft Rotation - counterclockwise, horizontal mounting
only

Table of Contents

Other manuals for Nilfisk-Advance CS7000

Related product manuals