Oce PlotWave 340 Operation Guide

Create and open a Smart Inbox for print jobs (Smart Inbox section)
Introduction
There are two ways to create and open a Smart Inbox for print jobs in Océ Express WebTools:
• In the Smart Inbox section under the [Jobs] tab.
• In Publisher Express.
NOTE
• Note that the Smart Inboxes for print jobs created in the Smart Inbox section and Publisher
Express are only visible on your personal browser. When you send a print job to the specific
Smart Inbox, that Smart Inbox also becomes visible on the user panel.
• Note that the Smart Inboxes or print jobs created in the Smart Inbox section and Publisher
Express are not permanent. Once the Smart Inbox is empty, it will disappear.
Procedure
1.
Select the [Jobs] tab.
2.
Click on [Open Smart Inbox].
3.
Click on the blank field to open a drop-down list with the Smart Inboxes available on your system.
You can open an existing Smart Inbox from the list or you can type the name of a new Smart
Inbox.
4.
Enter the name of the new Smart Inbox and press Enter, or select the desired Smart Inbox from
the list.
The Smart Inbox is now displayed in the Smart Inbox section.
Create and open a Smart Inbox for print jobs (Smart Inbox section)
100
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux