Oce PlotWave 340 Operation Guide

Define the IP type
Introduction
Next to IPv4 the printer also supports IPv6. You can choose to use either IPv4 or IPv6, but Océ
Express WebTools also allows you to use both simultaneously. For more information on the
differences between IPv4 and IPv6, please consult the Connectivity manual.
Procedure
1.
Open the [Configuration] - [Connectivity] tab.
2.
Click on [IP type] under the [Network adapter] settings.
3.
Choose between [IPv4], [IPv6] or [IPv4 and IPv6 both enabled].
4.
Click [Ok] to confirm your entry.
Define the IP type
112
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux