Oce PlotWave 340 Operation Guide

Clear a media jam in the heater section
Introduction
When a media jam in the heater section occurs, you have to handle with care.
IMPORTANT
During normal use the fuser has to remain closed. Only open it to remove the media after a
media jam.
Procedure
1.
Wait a few moments to let the heater cool down.
2.
Use the media jam clearance handle to open the upper back cover.
Clear a media jam in the heater section
312
Chapter 8 - Support

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux