Oce PlotWave 340 Operation Guide

Import a CA-signed certificate: Import the intermediate certificate
To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).
When you import the certificate you need to:
• Import the root certificate
•
Import the intermediate certificate
• Import the CA-signed certificate
• Check and import the root certificate
Complete all procedures to successfully import the certificate.
Procedure
1.
Open the [HTTPS] tab
2.
Click on [Import CA-signed certificate]
3.
Select [Intermediate certificate] in Certificate type.
4.
Browse to the Intermediate certificate file and click [Import]
5.
When the message [Certificate successfully imported.] opens, go back to the main page to import
the [CA-signed certificate]
Import a CA-signed certificate: Import the intermediate certificate
122
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux