Oce PlotWave 340 Operation Guide

Clear the system
When to do
On the user panel, you can remove all print and copy jobs from the system.
Procedure
1.
Tap the System thumbnail in the dynamic bar. A new window opens.
2.
In the list in the bottom right corner of the screen, select [Clear system].
A wizard opens.
NOTE
Make sure you have saved all the information. All print and copy jobs are removed.
3.
Follow the steps in the wizard, and complete the procedure.
Result
After you have followed the steps, the system will reboot and all print and copy jobs are
removed.
Clear the system
240
Chapter 4 - Use the Printing System

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux