Oce PlotWave 340 Operation Guide

Create and open a Smart Inbox for print jobs (Publisher Express)
NOTE
Note that with this procedure you not only create a Smart Inbox, but you also send a job to the
printer.
Procedure
1.
Select the [Jobs] tab.
2.
Click on [Create new job] in the Publisher Express section.
3.
In the [Workflow] section, click on the Smart Inbox field. A drop-down list with Smart Inboxes that
contain one or more jobs opens.
4.
Select the desired Smart Inbox from the list, or enter the name of the new Smart Inbox and press
Enter.
5.
Click [Ok] to send the print job to the printer in the new Smart Inbox.
The Smart Inbox is now displayed in the Smart Inbox section.
Create and open a Smart Inbox for print jobs (Publisher Express)
Chapter 3 - Define your Workflow with Océ Express WebTools
101

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux