Oce PlotWave 340 Operation Guide

Scan CAD colour to TIFF format
Introduction
When you want to scan a CAD colour to TIFF format, you can select the presets on the user panel.
Procedure
1.
Feed the original face up and centred on the original feeding table.
2.
Tap the scan tile on the user panel and select your preferred location in the scan Smart Access.
When you do not select a location the file is sent to the public Smart Inbox.
3.
Tap the scan tile again. A window with a list of presets opens.
4.
Tap the [File type] preset.
5.
Select [TIFF].
6.
Tap the [Image] preset.
7.
Select [CAD colour].
8.
Tap the green button.
Result
A scan to TIFF file is made, and sent to your preferred location. Default you can find your file in
the public Smart Inbox in Océ Express WebTools.
Scan CAD colour to TIFF format
Chapter 4 - Use the Printing System
225

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux