Oce PlotWave 340 Operation Guide

Load a media roll (position 1)
NOTE
When your printing system is equipped with an additional media roll, it is advised to load an A0
or E-size media roll on position 1 and an A2 or C-size media roll on position 2.
CAUTION
Watch your fingers when you handle the media roll.
Procedure
1.
Pull firmly to open the media drawer.
2.
Place the new media roll on the roll loading station.
3.
Pull (1) the handle of the roll holder locking mechanism towards you.
Slide (2) the roll holder into the right side of the core of the new media roll.
Load a media roll (position 1)
Chapter 5 - Maintain the Printing System
263

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux