Oce PlotWave 340 Operation Guide

Change the language settings in Mozilla Firefox
Introduction
You can change the language settings for Océ Express WebTools in your preferred browser.
NOTE
It is possible that the options menu is put under a different menu, depending on the Mozilla
Firefox version you use.
Procedure
1.
Open Mozilla Firefox.
2.
Click on [Firefox] in the upper left hand corner of the window.
3.
Click on [Options] - [Options]. The Options window opens.
4.
Click on the [Content] tab.
5.
In the [Languages] section click on the [Choose...] button. The languages window opens.
6.
Select the preferred language. Click the [Add] button, when you need to add a new language to
the list.
7.
Click [Move up] to move the language to the top of the list.
8.
Click [OK] to confirm or [Cancel] to reject, in both windows.
9.
Click on the [Reload] icon in the toolbar. Océ Express WebTools is displayed in your preferred
language.
Change the language settings in Mozilla Firefox
Chapter 3 - Define your Workflow with Océ Express WebTools
81

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux