Oce PlotWave 340 Operation Guide

Use the Océ PostScript
®
3 Driver to send a print job
Introduction
Océ provides the Océ PostScript
®
3 Driver that allows you to send print jobs to your printer.
NOTE
You need a license to be able to print PostScript files on the printer.
Illustration
Step Action Remarks
1 Open the file that you want to print
in the source application.
2 From the [File] menu of the applica-
tion, click [Print].
3 Select the product name of your
printer in the [Printer] area of the
[Print] dialogue box.
4 Click [Properties] and [Advanced]. When you select Properties you can make set-
tings for the print job.
5 Activate the Océ Job Ticket to over-
rule the default values for the job set-
tings.
6 Check and change the Printer Fea-
tures settings if necessary.
7 Click [OK] to send the print job to the
Smart Inbox or the print queue.
Use the Océ PostScript® 3 Driver to send a print job
Chapter 4 - Use the Printing System
179

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux