The Smart Access
Introduction
The Océ ClearConnect gives easy access to your print, copy, and scan jobs and supports the
green button approach via the Smart Access.
The Smart Access is the dynamic lower section of the user panel. The Smart Access enables you
to quickly start your job without the need to make additional settings.
To start a job, you only have to:
1. Insert an original for scan and copy jobs, or select a print job from one of the locations in the
Smart Access (for example the public Smart Inbox).
2. In the Smart Access select the number of copies when applicable, and tap the green button
Smart Access to start the job.
The Smart Access is dynamic and its functionality changes when you select the copy, scan, or
print tile.
NOTE
For more information on the workflow of basic copy, scan, and print jobs see,
Do a default copy
job
on page 54,
Do a default scan job
on page 56, and
Do a default print job
on page 58.
The Copy Smart Access
Tap the copy tile on the user panel to view the copy Smart Access. The Smart Access has the
following functionalities:
Component Function
1. numeric panel Select the number of copies.
2. [live scan view] Check how your document is being scanned by the printer.
You can check the width and alignment of the original to ensure best
performance.
3. [green button] Tap the green button to start the job.
The Scan Smart Access
Tap the scan tile on the user panel to view the scan Smart Access. The Smart Access has the
following functionalities:
The Smart Access
42
Chapter 2 - Get to Know the Printing System
To Next Page
Loading...
Need help?
General
