Oce PlotWave 340 Operation Guide

Preset category: [Layout]
Setting Settings values Function
[Cut size] [Cut method]:
• [Synchro]
• [Standard]
• [Custom]
When set to [Synchro], the print is cut depen-
ded of the image.
When set to [Standard], the print is cut to a
standard media size.
When set to [Custom], you must enter the
sizes manually.
[Add a leading strip] Adds a blank strip at the beginning of the out-
put.
From 0 to 400 mm, or 0 to 16 inches.
[Add a trailing strip] Adds a blank strip at the end of the output.
From 0 to 400 mm, or 0 to 16 inches.
[Rotation] [Automatic media saving]
[0°]
[90°]
[180°]
[270°]
Rotates the image counter-clockwise.
Select [Automatic media saving] to use the
media in the most efficient way.
4
Advanced settings for print jobs
Chapter 4 - Use the Printing System
193

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux