Oce PlotWave 340 Operation Guide

The scanner states
State Icon Description
[User intervention re-
quired]
General error message.
[Scanner is busy] The scanner is active.
[Scanner is ready] The scanner is ready to start a scan job.
The toner states
Icon Description
Toner OK
Toner low, or empty.
The Remote Service States
Icon Description
no icon [Remote Service] is either disabled or enabled and connected to Océ.
[Remote Service] is enabled, but could not connect to Océ.
Remote assistance to the system is enabled and currently accepting a connection.
The E-shredding states
Icon Description
no icon E-shredding is disabled.
E-shredding is enabled or busy.
A tooltip is available with extra information.
The system monitor
Chapter 3 - Define your Workflow with Océ Express WebTools
73

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux