Omron R88D-1SN ECT Series User Manual

39
Items to Check After Unpacking
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
The following product models come with an instruction manual and a connector. Use the connector
when wiring an external regeneration resistance unit to a Servo Drive.
Applicable models: R88A-RR550

This product comes with an instruction manual and two connectors to extend a wiring.
This product comes with two screws (M4×12) for mounting.
External Regeneration Resistor Unit
External Dynamic Brake Resistor
Shield Clamp
connector

Omron R88D-1SN ECT Series Specifications

General

Feedback	Incremental encoder, Absolute encoder
Position Control	Yes
Speed Control	Yes
Torque Control	Yes
Communication Interface	EtherCAT
Power Supply Voltage	200 to 240 VAC
Output Power	0.1 to 1.5 kW
Input Voltage Range	170 to 264 VAC
Control Method	Sine-wave PWM control
Main Circuit Power Supply	200-240 VAC
Applicable Motor Capacity	0.1 to 1.5 kW
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Encoder Error
Ambient Operating Temperature	0 to 55°C
Vibration Resistance	4.9 m/s² (10 to 55 Hz)
Shock Resistance	98 m/s2
Weight	Varies by model