Omron R88D-1SN ECT Series User Manual

Related Manuals
42
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
NX-series Safety
Control Units
User's Manual
Z930 NX-SL
NX-SI
NX-SO
Learning how to use the
NX-series Safety Con-
trol Units.
Describes the hardware,
setup methods and functions
of the NX-series Safety Con-
trol Units.
Sysmac Studio
Version 1 Opera-
tion Manual
W504 SYSMAC-SE2

Learning about the oper-
ating procedures and
functions of the Sysmac
Studio.
Describes the operating pro-
cedures of the Sysmac Stu-
dio.
Sysmac Studio
Drive Functions
Operation Manual
I589 SYSMAC-SE2

Learning how to set up
and adjust the Servo
Drives.
Describes the operating pro-
cedures of the Sysmac Stu-
dio.
SYSMAC
CJ-series Position
Control Unit Oper-
ation Manual
W487 CJ1W-NC281
CJ1W-NC481
CJ1W-NC881
CJ1W-NCF81
CJ1W-NC482
CJ1W-NC882
CJ1W-NCF82
Learning about the NC
Units (CJ1W-NC281/
481/ 881/ F81/ 482/ 882/
F82).
Describes the setup meth-
ods and operating proce-
dures of the NC Units.
G9SP-series
Safety Controller
Operation Manual
Z922 G9SP-N10S
G9SP-N10D
G9SP-N20S
Learning how to use the
G9SP-series safety Con-
trollers.
Describes the hardware,
setup methods and functions
of the G9SP-series safety
Controllers.
Manual name Cat. No. Model numbers Application Description

Omron R88D-1SN ECT Series Specifications

General

Feedback	Incremental encoder, Absolute encoder
Position Control	Yes
Speed Control	Yes
Torque Control	Yes
Communication Interface	EtherCAT
Power Supply Voltage	200 to 240 VAC
Output Power	0.1 to 1.5 kW
Input Voltage Range	170 to 264 VAC
Control Method	Sine-wave PWM control
Main Circuit Power Supply	200-240 VAC
Applicable Motor Capacity	0.1 to 1.5 kW
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Encoder Error
Ambient Operating Temperature	0 to 55°C
Vibration Resistance	4.9 m/s² (10 to 55 Hz)
Shock Resistance	98 m/s2
Weight	Varies by model