Omron R88D-1SN ECT Series User Manual

9 - 27
9 Details on Servo Parameters
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
9-2 Common Control Objects
9
9-2-14 3041 hex: Command Dividing Function
• Selects the interpolation method for the command in the Cyclic synchronous position mode (csp).
• This object is available for the unit version 1.2 or later.
• In the unit version 1.1 or earlier, 1st Order Interpolation is always performed.
 Description of Set Values
Subindex 10 hex: Interpolation Method Selection in csp
Set
value
Description
0 1st Order Interpolation
1 2nd Order Interpolation

Omron R88D-1SN ECT Series Specifications

General

Feedback	Incremental encoder, Absolute encoder
Position Control	Yes
Speed Control	Yes
Torque Control	Yes
Communication Interface	EtherCAT
Power Supply Voltage	200 to 240 VAC
Output Power	0.1 to 1.5 kW
Input Voltage Range	170 to 264 VAC
Control Method	Sine-wave PWM control
Main Circuit Power Supply	200-240 VAC
Applicable Motor Capacity	0.1 to 1.5 kW
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Encoder Error
Ambient Operating Temperature	0 to 55°C
Vibration Resistance	4.9 m/s² (10 to 55 Hz)
Shock Resistance	98 m/s2
Weight	Varies by model