Flash
Description The FLASH or FLASH/RCL button is used to allow a proprietary
telephone user to disconnect the current call and originate another
call without hanging up first.
Conditions • If External Feature Access is enabled by System Programming, this
function does not work for an outside call.
• Pressing the FLASH or FLASH/RCL button re-starts the conversation
duration, outputs a Station Message Detail Recording (SMDR) call
record, inserts the automatic pause, and checks toll restriction level
again.
Programming References
Section 4, System Programming
[414] Disconnect Time
[990] System Additional Information, Fields (3), (39)
Feature References Section 3, Features
External Feature Access
Operation References DPT Features
—User Manual Flash
F 3 Features
3-78 Features
To Next Page
Loading...
