4.3 System Programming
Area Code Assignment
125
4-56 System Programming
Description Assigns up to ten area codes which are necessary when using the
Caller ID feature. By assigning your area code, the system records
the caller’s phone number modified by programs [126] “Caller ID
Modification for Local Call” and [127] “Caller ID Modification for
long distance call”.
Selection • Location number: 01 through 10
• Area code: 1 through 6 digits
Default All locations – Blank
Programming 1. Enter 125.
Display: 125 AREA CODE
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:
4. Enter an area code.
To change the current entry, press CLEAR and enter the new area
code.
5. Press STORE.
6. To program another location number, press NEXT or
PREV, or SELECT and the desired location number.
7. Repeat steps 4 through 6.
5. Press END.
Conditions • The area code can be six digits long. Valid numbers are from 0 to 9.
• The location numbers used in this program corresponds to those in
program [126] “Caller ID Modification for Local Call”.
Feature Reference Section 3, Features
Caller ID
Call Log, Incoming
To Next Page
Loading...
