Panasonic KX-TD308 - Pulse to Tone Conversion

3 Features P
Features 3-125
Pulse to Tone Conversion
Description This feature allows the extension user to change from pulse dial to
tone (DTMF) dial so that the user can access special services such
as computer-accessed long distance calling or voice mail services.
Conditions • This feature works only on outside lines set to Pulse Dialing mode or
Call Blocking mode.
• Dial Type Selection provides selection of a dial mode for each outside
line.
• This feature is unavailable to DISA (Direct Inward System Access)
callers.
• Changing tone to pulse is not possible.
Programming References
Section 4, System Programming
[402] Dial Mode Selection
Feature References Section 3, Features
Dial Type Selection
Operation References DPT Features, Standard Telephone Features
—User Manual Pulse to Tone Conversion