Panasonic KX-TD308 - TRS Entry Code Assignment for Extra Table

4.5 TRS / ARS Programming
TRS Entry Code Assignment for Extra Table
333
4-92 System Programming
Description This program allows you to specify the numbers for extra Denied
or Excepted Code Table for expansion.
Selection
• Location number: 001 through 100
• Toll call number: 10 digits (max.)
Default All locations – Not stored
Programming 1. Enter 333.
Display: 333 TRS EXTRA -
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4. Enter a toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location number, press NEXT or PREV,
or SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions There is a maximum of either 120 toll call numbers for Denied Code
Table or a maximum of 105 toll call numbers for Excepted Code Table.
Each number has a maximum of ten digits, consisting of 0 through 9, and
. The character “ ” can be used as a wild card character.
Feature References Section 3, Features
Toll Restriction