System Programming 4-3
4.1.1 Using Proprietary Telephones
Soft Buttons and SHIFT Button on the Display DPT
Three soft buttons are provided just below the display on the
display of Digital Proprietary Telephones (DPT), KX-T7433, KX-
T7436, KX-T7230 and KX-T7235. The functions of these soft
buttons vary as the programming procedures advance step by step.
Those functions that are currently assigned to the buttons are
shown on the lower line of the display. (See “Viewing the Display”
on page 4-6 for more information on the display lines.)
If the SHIFT button indicator is on, two functions are available
with each soft button. To alternate between the two functions,
press the SHIFT button on the right side of the display.
Soft button variations
CLR NEXT
Soft 1 Soft 2
Soft 3 SHIFT
Type 1
Example:
KX-T7230 Display
Buttons
SKP+ CLR NEXT
Soft 1 Soft 2
Soft 3 SHIFT
SKP- PREV
Soft 1 Soft 2
Soft 3 SHIFT
Press SHIFT
to alternate
Type 2
-> SEL+ NEXT
Soft 1 Soft 2
Soft 3 SHIFT
<- SEL- PREV
Soft 1 Soft 2
Soft 3 SHIFT
Type 3
Press SHIFT
to alternate
A B C
Soft 1 Soft 2
Soft 3 SHIFT
a b c
Soft 1 Soft 2
Soft 3 SHIFT
Type 4
Press SHIFT
to alternate
To Next Page
Loading...
