6-4 Troubleshooting
6.1 Troubleshooting
(Continued from the
previous page.)
No
Can you dial
out on an
outside line?
Connection between the central office and the system:
CAUSE
Outside lines are connected to the T2/T1.
●
●
● T2
● R1
● T1
● R2
Outside line
KX-TD308
SOLUTION
Reconnect the outside lines
to the T1/R1 or T2/R2 of the
telephone jack using 2-
conductor wiring.
Outside lines are connected to the T2/R1.
●
●
● T2
● R1
● T1
● R2
Outside line
KX-TD308
6.1.3 Operation
PROBLEM
• When using the speaker-
phone mode with a
proprietary telephone
KX-T7130 or KX-T7030,
nothing is audible.
• When using the speaker-
phone/monitor mode with
a digital proprietary
telephone, nothing is
audible.
The unit does not ring.
PROBABLE CAUSE
• The HANDSET /
HEADSET selector of
the KX-T7130 or KX-
T7030 is set to the
“HEADSET” position.
• The “HEADSET” mode
is selected by Station
Programming,“Handset/
Headset Selection”.
The Ringer Volume
Selector is set to “OFF”.
POSSIBLE SOLUTION
• When the headset is not used, set
the HANDSET / HEADSET
selector to the “HANDSET”
position.
• When the headset is not used,
select the “HANDSET” mode by
Station Programming.
Set to “HIGH” or “LOW”.
To Next Page
Loading...
