3 Features O
Features 3-109
One-Touch Dialing
Description One-Touch Dialing offers the proprietary telephone (PT) user one-
touch access to a desired party or system feature. This is activated
by storing an extension number, telephone number or a feature
number (up to 16-digits) in an One-Touch Dialing button. The
number of buttons available depends on the type of PT. One-Touch
Dialing buttons can be programmed to flexible buttons: CO, DSS
(Direct Station Selection) or PF (Programmable Feature).
Conditions • It is possible to store an account code into an One-Touch Dialing
button.
• It is possible to assign an One-Touch Dialing button for direct access to
Voice Mail.
• Speed Dialing, One-Touch Dialing, manual dialing, Last Number
Redial and Saved Number Redial can be used together.
• It is possible to store a number consisting of 17 digits or more by
dividing it and storing it in two One-Touch Dialing buttons. In this
case, a line access code should be stored in the first button.
• If Full One-Touch Dialing is enabled, there is no need to go off-hook,
before pressing the One-Touch Dialing button.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual
Flexible Button Assignment – One-Touch Dialing Button
Full One-Touch Dialing Assignment
Feature References Section 3, Features
Full One-Touch Dialing
Operation References DPT Features
—User Manual One-Touch Dialing
To Next Page
Loading...
