4.9 Resource Programming
Floating Number Assignment
813
System Programming 4-139
Description Assigns the floating numbers for External Pagers, DISA (Direct
Inward System Access) messages and extension groups. These
numbers can be used the same way extension numbers are used for
station access.
Selection • Floating station: Pager / DISA / E-Group 1 through 8
• Floating number: 2 through 4 digits
Default Pager=196; DISA=198; E-Group 1=191;
E-Group 2=192; E-Group 3=193; E-Group 4=194;
E-Group 5=291; E-Group 6=292; E-Group 7=293;
E-Group 8=294
Programming 1. Enter 813.
Display: 813 FLOATING #
2. Press NEXT to program Pager 1.
Display example: Pager1 :EXT196
To program another floating station, keep pressing NEXT or PREV
until the desired floating station is displayed.
3. Enter a floating number.
To change the current entry, press CLEAR and enter the new floating
number.
4. Press STORE.
5. To program another floating station, keep pressing NEXT or
PREV until the desired floating station is displayed.
6. Repeat steps 3 through 5.
7. Press END.
Conditions • A floating number is composed of two to four numerical digits, 0
through 9.
• The first one or two digits of the floating numbers are subject to
program [100] “Flexible Numbering, (01) through (16) 1st through 16th
hundred extension blocks”.
To Next Page
Loading...
