2-22 Installation
2.3.7 External Music Source Connection2.3.7 External Music Source Connection
One music source such as a radio (user-supplied) can be connected
to the KX-TD308 as illustrated below.
Insert the plug to the earphone / headphone
jack on the external music source.
Use an EIAJ RC-6701 A plug (two-
conductor,
ø
2.5mm in diameter).
• Input impedance: 8 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m (33 feet)
Note • System Programming of music sources used for Music on Hold and
Background Music is required.
• To adjust the sound level of the Music on Hold, use the volume control
on the external music source.
Programming References
Section 4, System Programming
[803] Music Source Use
[990] System Additional Information, Field (20)
Feature References Section 3, Features
Background Music (BGM) Background Music (BGM) – External
Music on Hold