O 3 Features
3-112 Features
Operator Call
Description Allows the extension user to call an extension operator by dialing
the feature number, if at least one operator is assigned. There can
be one or two extensions assigned as Operator 1 and 2.
Conditions When an operator call (default: 0) is made, the call is connected to
Operator 1 first, and then Operator 2 if Operator 1 is busy. Through
System Programming, it is possible to change the routing so that Operator
1 and Operator 2 are called simultaneously when the operator is called.
Programming References
Section 4, System Programming
[006] Operator / Manager Extension Assignment
[100] Flexible Numbering, Operator call
[990] System Additional Information, Field (44)
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Operator Call
To Next Page
Loading...
