Panasonic KX-TD308 - Call Forwarding - to Outside Line

3 Features C
Features 3-31
• Both the Call Forwarding and Do Not Disturb (DND) functions can be
set at the same time, but cannot work at the same time.
• Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function. If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.
• A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb
[202] Call Forwarding – No Answer Time
Station Programming.......................................................User Manual
Flexible Button Assignment – FWD/DND Button
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Call Forwarding — No Answer
Call Forwarding – to Outside Line
Description Calls directed to your extension will be sent to an external
destination. The outside telephone number must be pre-
programmed.
Conditions • Types of calls which are forwarded by this function are:
Outside calls – Direct In Lines (DIL) 1:1;
Direct Inward System Access (DISA)
Intercom calls – Extension; Transfer
• The forwarding extension’s Toll Restriction, Automatic Route Selection
(ARS) and Account Code Entry requirements still apply.
• Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
• If an extension in Call Forwarding is also in a Hunt group a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
• Both the Call Forwarding and Do Not Disturb (DND) functions can be
set at the same time, but cannot work at the same time.
• Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function. If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.