4.5 TRS / ARS Programming
ARS Mode
312
4-82 System Programming
Description Allows you to turn on or off the Automatic Route Selection (ARS)
mode. ARS, if enabled, selects the least expensive route to be used
for an outside call.
Selection
On / Off
Default Off
Programming 1. Enter 312.
Display: 312 ARS MODE SET
2. Press NEXT.
Display example: ARS:Off
3. Press SELECT until the desired selection is displayed.
4. Press STORE.
5. Press END.
Conditions • If “Off” is selected, the Automatic Line Access feature functions
instead of ARS.
• Programs [313] through [331] are used to program ARS.
Feature References Section 3, Features
Automatic Route Selection (ARS)
Line Access, Automatic
To Next Page
Loading...
