Panasonic KX-TD308 - Pause Insertion, Automatic

3 Features P
Features 3-119
Programming References
Section 4, System Programming
[100] Flexible Numbering, Parallel telephone mode
Feature References Section 3, Features
EXtra Device Port (XDP)
Operation References DPT Features, Standard Telephone Features
—User Manual Paralleled Telephone Connection
Pause Insertion, Automatic
Description This function is used to insert a pre-assigned pause between the
outside line access number, the host PBX, Centrex or carrier access
code and dialed digits.
Conditions • This feature requires previous programming of an outside line access
number, host PBX, Centrex and special carrier access codes as well as
assignment of the pause duration.
• This feature works for Speed Dialing, One-Touch Dialing, Last Number
Redial, Saved Number Redial, Pickup Dialing, Call Forwarding – to
Outside Line as well as for ordinary calls.
• Pressing the PAUSE button in dialing number inserts a pause for a pre-
assigned time.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Automatic line access / ARS, Outside line
access
[311] Special Carrier Access Codes
[411] Host PBX Access Codes
[412] Pause Time
Feature References Section 3, Features
Host PBX Access Toll Restriction
Operation References Not applicable.