System Programming 4-29
4.2 Manager Programming
Quick Dial Number Set
009
Description Stores up to eight quick dial numbers.
Selection • Location number: 1 through 8
• Desired number: 16 digits (max.)
Default All location numbers – Not stored
Programming 1. Enter 009.
Display: 009 QUICK DIAL
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 1, you can also press NEXT.
Display example: 1:Not Stored
4. Enter a desired number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • A maximum of sixteen digits, consisting of 0 through 9, can be
assigned to a quick dial number.
• Before programming, assign a feature number for each location first in
program [100] “Flexible Numbering”.
Feature References Section 3, Features
Quick Dialing
To Next Page
Loading...
