A 3 Features
3-6 Features
Automatic Configuration
†
Description The system sends the Voice Processing System (VPS) data which
contains the extension number configuration information. The VPS
automatically creates mailboxes with this data (Quick Setup).
Conditions • The data is transmitted to the VPS via the lowest jack port.
• If your VPS is a Panasonic KX-TVS series and KX-TD308 cannot be
selected in the PBX type setup menu, select “KX-TD816” and follow
the steps for a KX-TD816.
Programming References
No programming required.
Feature References None
Operation References Not applicable.
Automatic Hold by CO Button
Description This feature, if programmed, allows a proprietary telephone user to
hold a current outside call by pressing another CO button. While
talking to an outside party, pressing a CO button for an incoming or
outgoing call provides an automatic hold for the current call.
Conditions • If Automatic Hold mode is disabled, pressing a CO button disconnects
the current call. (Default=Disable)
• It is possible to return to the held party by pressing the corresponding
CO button.
Programming References
Section 4, System Programming
[108] Automatic Hold by CO / DSS Button
Feature References None
Operation References Not applicable.
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
To Next Page
Loading...
