4.8 Extension Programming
Voice Mail Access Codes
609
4-128 System Programming
Description Assigns a mailbox number for each extension, only if program
[990] “System Additional Information, Field (18)” is set to “free”.
Selection • Jack number: 1 through 8, (-1 / -2),
(-1 = first part, -2 = second part)
• Mailbox number: 16 digits (max.)
Default All jacks – Not stored
Programming 1. Enter 609.
Display: 609 V-MAIL CODES
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #1-1:Not Stored
4. Enter a mailbox number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• The system supports a maximum of four jacks for connection to a Voice
Processing System as the Voice Mail or Automated Attendant ports.
• Each mailbox number has a maximum of 16 digits, consisting of 0
through 9, , # and PAUSE.
• To display parts of the mailbox number which have scrolled off the
display, press or .
Feature References Section 3, Features
Voice Mail Integration
To Next Page
Loading...
