4.5 TRS / ARS Programming
ARS Time
313
System Programming 4-83
Description Assigns times for the four Automatic Route Selection (ARS) time
schedules. It is possible to split a day into four time zones
(maximum) so that the least expensive line is selected for that time.
According to the service hours and charges offered by your carriers,
enter the starting time of each zone.
Selection • Day of the week: 1 (Mon) / 2 (Tue) / 3 (Wed) / 4 (Thu) /
5 (Fri) / 6 (Sat) / 7 (Sun) / (all days)
• Time schedule: A / B / C / D
• Time (hour) : 1 through 12 / Disable (no schedule)
• AM / PM
Default All days of the week : A – 8:00 AM; B – 5:00 PM; C – 9:00 PM;
D – Disable
Programming 1. Enter 313.
Display: 313 ARS TIME SET
2. Press NEXT.
Display: Day of week?→
3. Enter the day of the week.
Display example: MON-A: 8:00 AM
To program another time schedule, keep pressing NEXT or PREV
until the desired time schedule is displayed.
4. Enter the hour.
To set no schedule (Disable), press SELECT and go to step 7.
If “Disable” is selected, pressing SELECT shows the previous stored
hour.
To change the current entry, press CLEAR and enter the new hour.
5. Press to select AM / PM.
6. Press SELECT for AM or PM.
7. Press STORE.
8. To program another time schedule, keep pressing NEXT or
PREV until the desired time schedule is displayed.
9. Repeat steps 4 through 8.
10. Press END.
To Next Page
Loading...
