4.9 Resource Programming
External Pager Confirmation Tone
805
4-136 System Programming
Description Used to remove the confirmation tone for external pagers. The
default setting sends confirmation tone 2 to the external pagers
before paging is broadcast. This programming applies to all the
external pagers.
Selection On / Off
Default On
Programming 1. Enter 805.
Display: 805 EX PAGE TONE
2. Press NEXT.
Display example: Tone:On
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions The external pager is a user-supplied item. One external pager can be
installed to the system.
Feature References Section 3, Features
Confirmation Tone Paging – External
Paging – All
To Next Page
Loading...
