N 3 Features
3-106 Features
Night Service
Description The system supports both night and day modes of operation. The
system operation for originating and receiving calls can be different
for day and night modes. The system operation for restricting toll
calls can be arranged separately to prevent unauthorized toll calls at
night.
Switching the Day / Night Mode
Day / Night mode can be switched either automatically at a pre-
assigned time or manually by the operator or the manager at any
desired time.
Automatic Night Service: If you select the automatic
switching mode, your system will switch the day / night mode
at the programmed time each day. The starting time of the
day / night mode can be set for each day.
Manual Night Service: If you select the manual switching
mode, the operator or the manager can switch the day / night
mode by dialing the feature number.
Conditions The following programming items may be assigned differently for the day
and night modes.
[407]–[408] DIL 1:1 Extension — Day / Night
[409]–[410] Intercept Extension — Day / Night
[500]–[501] Toll Restriction Level — Day / Night
[603]–[604] DIL 1:N Extension and Delayed Ringing
— Day / Night
[605]–[606] Outgoing Permitted Outside Line Assignment
— Day / Night
[607]–[608] Doorphone Ringing Assignment — Day / Night
Programming References
Section 4, System Programming
[100] Flexible Numbering, Night service mode
[101] Day / Night Service Switching Mode
[102] Day / Night Service Starting Time
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Night Service
Operator / Manager Service Features
Night Service On / Off
To Next Page
Loading...
