4.3 System Programming
Voice Mail Extension Number Assignment †
118
System Programming 4-51
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
Description Assigns the extension number for the voice mail number. These
numbers can be used the same way extension numbers are used for
station access.
Selection • Voice mail number (VM): 1 through 4
• Extension Number: 2 through 4 digits
Default VM-1=295, VM-2=296, VM-3=297, VM-4=298
Programming 1. Enter 118.
Display: 118 VM EXT #
2. Press NEXT.
Display: VM NO?→
3. Enter a voice mail number.
To enter voice mail number 1, you can also press NEXT.
Display: VM-1:#2-1:295
4. Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another voice mail number, press NEXT or
PREV, or SELECT and the desired voice mail number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • You cannot leave an entry empty.
• Double entries and incompatible entries for extension numbers are
invalid.
• The display shows “VM-X:#Y-1:ZZZ” in step 3.
“X” means the voice mail number. “Y” means the jack number of the
voice mail port programmed in [117] “Voice Mail Number
Assignment”.
“-1” of Y-1 means the first part of jack number in digital line.
Y-2 means the second number of the jack number in digital line.
Feature References Section 3, Features
Voice Mail Integration for Digital Proprietary Telephones
To Next Page
Loading...
