3 Features M
Features 3-103
Message Waiting
Description The system supports the ability to inform the called party of a
message waiting. The called party, with a MESSAGE button,
knows there is a message if the MESSAGE button LED (Light
Emitting Diode) lights red. If the button is not provided or
assigned, the called party hears a special dial tone, when he / she
goes off-hook. Pressing the lit MESSAGE button or dialing the
Message Waiting feature number can call back the caller or listen to
messages which are stored in a mailbox in the Voice Processing
System.
Conditions • For a proprietary telephone which does not have a MESSAGE button, a
flexible CO button can be assigned as the MESSAGE button either by
System or Station Programming.
• For standard telephone users, the message waiting ring tone can be sent
to notify the user. The message waiting ring interval time is
programmable by System Programming (default: 0=no ring).
• Canceling a message can be performed from the sending extension or
from the receiving extension.
• The system supports a maximum of 16 simultaneous messages.
• Messages are always left on the original extension. They can not be
sent to a Call Forwarding or Station Hunting destination.
• The message waiting ring type can be changed in program [990], Field
(40).
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Message waiting
[216] Message Waiting Ring Interval Time
[990] System Additional Information Fields (9), (40)
Station Programming.......................................................User Manual
Flexible Button Assignment – Message Waiting (MESSAGE) Button
Feature References Section 3, Features
Dial Tone, Distinctive Voice Mail Integration
Operation References DPT Features, Standard Telephone Features
—User Manual Message Waiting Voice Mail Integration
To Next Page
Loading...
