EasyManua.ls Logo

Panasonic KX-TD308 - System Programming with Proprietary Telephone

Panasonic KX-TD308
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S 3 Features
3-148 Features
System Programming with Proprietary Telephone
Description The system can be programmed with a personal computer or a
proprietary telephone (PT).
PTs available for System Programming are: KX-T7436;
KX-T7433; KX-T7431; KX-T7235; KX-T7230; KX-T7130; and
KX-T7030 (Display Proprietary Telephones).
Two extensions are allowed to perform System Programming.
The available extensions are:
(1) An extension that is connected to jack 1.
(2) An extension that is assigned as a manager.
For more information and programming instructions, refer to
Section 4, “System Programming”.
Conditions During System Programming the system operates normally.
During System Programming the programming extension is considered
to be busy.
The display on the PT permits interactive programming.
Access to System Programming is allowed only one at a time.
To access system administration, a valid password must be entered.
The password is factory-programmed and can be changed.
A personal computer can be used to perform System Programming.
Programming References
Section 4, System Programming
[006] Operator / Manager Extension Assignment
[107] System Password
Feature References Section 3, Features
System Programming with Personal Computer
Operation References Not applicable.

Table of Contents

Other manuals for Panasonic KX-TD308

Related product manuals