4-28 System Programming
4.2 Manager Programming
Absent Messages (contd.)
008
Conditions • There is a maximum of nine messages. Messages 1 through 6 are
programmed at the factory but can be changed. Each message has a
maximum of 16 characters.
• You can enter a maximum of seven “%” characters per message which
can be programmed at each user’s extension. The station user can enter
0 through 9, and # for the % characters. If the user enters digits less
than the number of “%” characters, it is recommended to fill the
remaining “%” characters with “#” or “
”.
• If there are 4-digit extension numbers available in your system, add one
“%” to Message 3.
• To display parts of the message which have scrolled off the display,
press or .
Feature References Section 3, Features
Absent Message Capability
To Next Page
Loading...
