3 Features R
Features 3-133
Ringing Tone Selection for CO Buttons
Description Allows the digital proprietary telephone user to select the desired
ringer frequency for each CO button. This distinguishes different
incoming outside calls.
Conditions There are eight ringer frequencies available. One of them can be assigned
to a CO button that is assigned as each of the following buttons: Single-
CO or Loop-CO button. It is not possible to assign a ringer frequency to
any other button.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual
Ringing Tone Selection for CO Buttons
Feature References None
Operation References Not applicable.
To Next Page
Loading...
