4.10 Optional Programming
System Additional Information (contd.)
990
System Programming 4-149
SMDR
None
Operator Call
Timed Reminder
Account Code
Entry
1
1
1
1
1
0 : enable
1 : disable
0 : IRNA
1 : reorder tone is
sent
0 :
Operators 1 and 2
simultaneously
1 :
Operator 1 first
and then
Operator 2
0 : enable
1 : disable
0 : not printed out
1 : printed out
Enables or disables the SMDR printout for
RC (when an incoming call occurs) and
AN (when an incoming call is answered).
Selects the result when a call from DISA
(Direct Inward System Access) is invalid.
Selects the result of pressing “0” (default);
calls operators 1 and 2 at the same time or
Operator 1 first and then Operator 2 if
Operator 1 is busy.
Enables or disables the SMDR printout
when the Timed Reminder starts and the
alarm is not answered.
Programs whether or not the account code
is printed out in the SMDR.
Area Field
(42)
(43)
(44)
(45)
(46)
Description Selection Default References
05
06
To Next Page
Loading...
